3D Print Tolerance & Clearance Test Generator (STL) Community
Questions, answers and tips from people who use the 3D Print Tolerance & Clearance Test Generator (STL). Generate a numbered test plate with holes of increasing clearance and matching pegs to dial in your printer's fit.
Ask a question about 3D Print Tolerance & Clearance Test Generator (STL)
Anyone can read this page. To ask a question, reply or vote, please log in. It takes under a minute.
Log in to askNo questions yet. Yours can be first.
This page shows only real posts from real people, so it starts empty. The guide below has the questions people most often have about the 3D Print Tolerance & Clearance Test Generator (STL). Pick one to start a thread, or write your own.
From the tool guide: common questions about 3D Print Tolerance & Clearance Test Generator (STL)
The items below are not posts by community members. They come from the written guide for this tool and are here to get a conversation started. Use “Ask a follow-up” to open a thread about any of them.
Why are holes smaller than designed?
Over-extrusion and polygon approximation.
From the tool guide Ask a follow-upWhat this tool does
Why does an 8 mm hole print as 7.8 mm? Printers over-extrude, plastic shrinks and round holes polygon-ise, so every printer and material needs its own hole offset. This generator creates a plate with a row of holes at your nominal size plus increasing clearance (for example 0, 0.05, 0.10 … 0.35 mm), with numbers raised beside each hole and a matching plate of pegs at the nominal size.
How to use it, step by step
- Enter the nominal size and clearance range.
- Generate and download the plate.
- Print with your normal settings.
- Test fit and note the winning hole.
Tips from the guide
- Print with the same material and settings as the real part.
- Print slowly for a more accurate hole.
- Remember horizontal and vertical holes differ.
- Repeat for each material.
Common mistakes to avoid
- Testing with the wrong settings.
- Measuring holes with calipers instead of test fitting.
- Using one clearance for different materials.
Who uses it
- FDM users. Dial in fits for your printer.
- Resin users. Find shrink offsets.
- Designers. Standard clearances.
- Teachers. Teach tolerance concepts.
How to ask a question people can answer
A good thread on the 3D Print Tolerance & Clearance Test Generator (STL) saves everyone time. Start with a title that names the exact problem, such as the input you used, the result you expected and the result you got. A title like “Not working” is hard to answer, while a title with the specifics gets replies quickly.
- Say what you tried. List the steps you followed and any settings you changed, so replies do not repeat what you already did.
- Share a small example. A short sample input and the output you saw is worth more than a long description. Remove anything private first.
- Mention your setup. Your device, browser and whether you are on a phone or a computer can explain many odd results.
- One question per thread. Separate topics get clearer answers and are easier to find later with the search box above.
- Come back and reply. If a suggestion worked, say so and upvote it, and if you found the fix yourself, post it for the next person.
Community rules
Be kind, stay on topic and keep personal data out of your posts. Do not post adult, hateful or illegal content, advertising or repeated links. Every post is shown with its author’s username and date, and posts that break these rules can be hidden by moderators. This space is for help with the 3D Print Tolerance & Clearance Test Generator (STL) and related tasks, and it is separate from the sitewide discussion forum where broader topics live.