Bolt Torque, Preload & Strength Calculator (ISO Metric) Community
Questions, answers and tips from people who use the Bolt Torque, Preload & Strength Calculator (ISO Metric). Tightening torque, clamp force, proof load and design resistances for M3–M36 bolts by property class.
Ask a question about Bolt Torque, Preload & Strength Calculator (ISO Metric)
Anyone can read this page. To ask a question, reply or vote, please log in. It takes under a minute.
Log in to askNo questions yet. Yours can be first.
This page shows only real posts from real people, so it starts empty. The guide below has the questions people most often have about the Bolt Torque, Preload & Strength Calculator (ISO Metric). Pick one to start a thread, or write your own.
From the tool guide: common questions about Bolt Torque, Preload & Strength Calculator (ISO Metric)
The items below are not posts by community members. They come from the written guide for this tool and are here to get a conversation started. Use “Ask a follow-up” to open a thread about any of them.
What is the nut factor?
An empirical number that lumps thread and head friction; 0.20 is typical for plain dry steel.
From the tool guide Ask a follow-upWhat does 8.8 mean?
Minimum tensile strength 800 MPa and yield 640 MPa (the ratio is 0.8).
From the tool guide Ask a follow-upIs the chart for fine threads?
No — coarse threads; fine-thread bolts have larger stress areas.
From the tool guide Ask a follow-upWhat this tool does
The standard bolt-tightening relationship is T = K·d·F: the torque you apply equals the nut factor times the nominal diameter times the preload (clamp force) you get. This calculator turns it around for you: pick a metric size from M3 to M36 and a property class (4.6, 4.8, 5.6, 5.8, 6.8, 8.8, 9.8, 10.9 or 12.9), choose the percentage of proof load you want as preload (75% for reusable joints, up to 90% for permanent ones) and the friction condition (K = 0.20 dry, 0.17 zinc plated or lightly oiled, down to 0.10 lubricated), and it returns the torque in N·m, lbf·ft, lbf·in and kgf·m, the preload and the proof load.
How to use it, step by step
- Choose bolt size and property class.
- Set the preload percentage and the friction condition.
- Read the tightening torque and preload.
- Check the resistances and the torque chart.
Tips from the guide
- Lubricated bolts need much less torque for the same preload — reduce K.
- Tighten in a cross pattern and in two or three passes.
- Do not reuse bolts that have been tightened into yield.
- For critical joints measure preload directly.
Common mistakes to avoid
- Applying dry-thread torque to a lubricated bolt and overstressing it.
- Treating torque as exact — it is ±25–30%.
- Using coarse-thread values for fine-pitch bolts.
Who uses it
- Mechanics and fitters. Look up torques quickly for any metric bolt.
- Engineers. Estimate preload and joint capacity.
- Students. Learn the torque–tension relationship.
How to ask a question people can answer
A good thread on the Bolt Torque, Preload & Strength Calculator (ISO Metric) saves everyone time. Start with a title that names the exact problem, such as the input you used, the result you expected and the result you got. A title like “Not working” is hard to answer, while a title with the specifics gets replies quickly.
- Say what you tried. List the steps you followed and any settings you changed, so replies do not repeat what you already did.
- Share a small example. A short sample input and the output you saw is worth more than a long description. Remove anything private first.
- Mention your setup. Your device, browser and whether you are on a phone or a computer can explain many odd results.
- One question per thread. Separate topics get clearer answers and are easier to find later with the search box above.
- Come back and reply. If a suggestion worked, say so and upvote it, and if you found the fix yourself, post it for the next person.
Community rules
Be kind, stay on topic and keep personal data out of your posts. Do not post adult, hateful or illegal content, advertising or repeated links. Every post is shown with its author’s username and date, and posts that break these rules can be hidden by moderators. This space is for help with the Bolt Torque, Preload & Strength Calculator (ISO Metric) and related tasks, and it is separate from the sitewide discussion forum where broader topics live.