Extruder E-Steps, Rotation Distance & Flow Rate Calibration Calculator Community
Questions, answers and tips from people who use the Extruder E-Steps, Rotation Distance & Flow Rate Calibration Calculator. Calculate new e-steps, Klipper rotation_distance, flow multiplier and maximum print speed from simple measurements.
Ask a question about Extruder E-Steps, Rotation Distance & Flow Rate Calibration Calculator
Anyone can read this page. To ask a question, reply or vote, please log in. It takes under a minute.
Log in to askNo questions yet. Yours can be first.
This page shows only real posts from real people, so it starts empty. The guide below has the questions people most often have about the Extruder E-Steps, Rotation Distance & Flow Rate Calibration Calculator. Pick one to start a thread, or write your own.
From the tool guide: common questions about Extruder E-Steps, Rotation Distance & Flow Rate Calibration Calculator
The items below are not posts by community members. They come from the written guide for this tool and are here to get a conversation started. Use “Ask a follow-up” to open a thread about any of them.
What is rotation_distance?
Millimetres of filament per extruder motor revolution in Klipper.
From the tool guide Ask a follow-upWhat this tool does
An extruder that pushes 96 mm of filament when asked for 100 mm under-extrudes by 4% — enough to cause weak walls and gaps. The e-steps test fixes that: mark the filament, extrude 100 mm, measure what moved, and the calculator returns the corrected steps/mm for Marlin and the corrected rotation_distance for Klipper, with the exact G-code to apply them.
How to use it, step by step
- Do the 100 mm extrusion test.
- Enter current value and measured remaining distance.
- Apply the new value and save.
- Calibrate flow with a single-wall cube.
Tips from the guide
- Heat the nozzle to printing temperature for the test.
- Extrude slowly (2 mm/s).
- Repeat the test after changing the value.
- Calibrate e-steps before flow.
Common mistakes to avoid
- Changing flow and e-steps for the same error.
- Measuring with a cold nozzle.
- Using the wrong mark length.
Who uses it
- Printer owners. Initial calibration.
- Print farms. Standardise machines.
- Klipper users. rotation_distance maths.
- Troubleshooters. Fix under-extrusion.
How to ask a question people can answer
A good thread on the Extruder E-Steps, Rotation Distance & Flow Rate Calibration Calculator saves everyone time. Start with a title that names the exact problem, such as the input you used, the result you expected and the result you got. A title like “Not working” is hard to answer, while a title with the specifics gets replies quickly.
- Say what you tried. List the steps you followed and any settings you changed, so replies do not repeat what you already did.
- Share a small example. A short sample input and the output you saw is worth more than a long description. Remove anything private first.
- Mention your setup. Your device, browser and whether you are on a phone or a computer can explain many odd results.
- One question per thread. Separate topics get clearer answers and are easier to find later with the search box above.
- Come back and reply. If a suggestion worked, say so and upvote it, and if you found the fix yourself, post it for the next person.
Community rules
Be kind, stay on topic and keep personal data out of your posts. Do not post adult, hateful or illegal content, advertising or repeated links. Every post is shown with its author’s username and date, and posts that break these rules can be hidden by moderators. This space is for help with the Extruder E-Steps, Rotation Distance & Flow Rate Calibration Calculator and related tasks, and it is separate from the sitewide discussion forum where broader topics live.