Heat-Set Insert, Screw Hole & 3D-Print Tolerance Chart Community
Questions, answers and tips from people who use the Heat-Set Insert, Screw Hole & 3D-Print Tolerance Chart. Hole sizes for heat-set inserts, screws and press fits by printer type.
Ask a question about Heat-Set Insert, Screw Hole & 3D-Print Tolerance Chart
Anyone can read this page. To ask a question, reply or vote, please log in. It takes under a minute.
Log in to askNo questions yet. Yours can be first.
This page shows only real posts from real people, so it starts empty. The guide below has the questions people most often have about the Heat-Set Insert, Screw Hole & 3D-Print Tolerance Chart. Pick one to start a thread, or write your own.
From the tool guide: common questions about Heat-Set Insert, Screw Hole & 3D-Print Tolerance Chart
The items below are not posts by community members. They come from the written guide for this tool and are here to get a conversation started. Use “Ask a follow-up” to open a thread about any of them.
Are the insert OD values exact?
Insert dimensions vary by supplier; use your datasheet value — the calculator formula is based on OD.
From the tool guide Ask a follow-upWhy different clearances for resin?
Resin prints more accurately, so smaller gaps work; SLS needs larger gaps for powder removal.
From the tool guide Ask a follow-upWhat is a pilot hole?
The pre-drilled hole for a self-tapping screw in plastic, about 0.8× the screw's major diameter.
From the tool guide Ask a follow-upIs this a replacement for testing?
No — use it as a starting point and verify with a print.
From the tool guide Ask a follow-upWhat this tool does
Getting holes right is the difference between a part that assembles and a part that goes in the bin. This page has three tools. The heat-set insert calculator takes the insert's outside diameter, your process (FDM, big nozzle, resin), material and hole direction and returns the diameter to design, a trial range, the minimum hole depth, the wall needed around the insert and the insertion temperature. A table lists typical sizes for M2–M8 inserts.
How to use it, step by step
- Choose the tab for inserts, screws or fits.
- Enter your insert OD, screw size or nominal diameter.
- Select your printing process and orientation.
- Model the hole at the result and test-print a coupon.
Tips from the guide
- Always print a one-minute coupon with five holes in 0.1 mm steps to calibrate your machine.
- Leave 1 mm of extra hole depth below the insert for displaced plastic.
- Small FDM holes print undersize; add 0.1 mm below 4 mm diameter.
- Horizontal holes sag at the top — consider teardrop shapes.
Common mistakes to avoid
- Modelling holes at nominal size and finding bolts will not fit.
- Using the same clearance for FDM and resin.
- Too little wall around an insert, causing cracking.
Who uses it
- CAD students and engineers. Quick, defensible hole sizes.
- Makers building enclosures. Heat-set inserts that hold.
- Anyone designing print-in-place parts. Right clearances per process.
How to ask a question people can answer
A good thread on the Heat-Set Insert, Screw Hole & 3D-Print Tolerance Chart saves everyone time. Start with a title that names the exact problem, such as the input you used, the result you expected and the result you got. A title like “Not working” is hard to answer, while a title with the specifics gets replies quickly.
- Say what you tried. List the steps you followed and any settings you changed, so replies do not repeat what you already did.
- Share a small example. A short sample input and the output you saw is worth more than a long description. Remove anything private first.
- Mention your setup. Your device, browser and whether you are on a phone or a computer can explain many odd results.
- One question per thread. Separate topics get clearer answers and are easier to find later with the search box above.
- Come back and reply. If a suggestion worked, say so and upvote it, and if you found the fix yourself, post it for the next person.
Community rules
Be kind, stay on topic and keep personal data out of your posts. Do not post adult, hateful or illegal content, advertising or repeated links. Every post is shown with its author’s username and date, and posts that break these rules can be hidden by moderators. This space is for help with the Heat-Set Insert, Screw Hole & 3D-Print Tolerance Chart and related tasks, and it is separate from the sitewide discussion forum where broader topics live.