Heat Sink & Thermal Resistance Calculator Community
Questions, answers and tips from people who use the Heat Sink & Thermal Resistance Calculator. Required heat-sink thermal resistance, finned heat-sink estimate, interface conduction and regulator heat.
Ask a question about Heat Sink & Thermal Resistance Calculator
Anyone can read this page. To ask a question, reply or vote, please log in. It takes under a minute.
Log in to askNo questions yet. Yours can be first.
This page shows only real posts from real people, so it starts empty. The guide below has the questions people most often have about the Heat Sink & Thermal Resistance Calculator. Pick one to start a thread, or write your own.
From the tool guide: common questions about Heat Sink & Thermal Resistance Calculator
The items below are not posts by community members. They come from the written guide for this tool and are here to get a conversation started. Use “Ask a follow-up” to open a thread about any of them.
What is Rθjc?
Junction-to-case thermal resistance from the component datasheet.
From the tool guide Ask a follow-upWhat h should I use?
About 5–10 W/m²K in still air, 20–60 with a small fan.
From the tool guide Ask a follow-upIs the fin estimate exact?
It is a first-order estimate; verify with the manufacturer's curve.
From the tool guide Ask a follow-upWhat this tool does
A heat sink is described by one number — its thermal resistance to ambient in K/W — and sizing one starts from the thermal 'Ohm's law': T_junction = T_ambient + P × (Rθjc + Rθcs + Rθsa). Enter the power to dissipate, the ambient temperature, the maximum junction temperature and the datasheet junction-to-case resistance and the interface (paste or pad) resistance, and the calculator returns the heat-sink resistance you need, the allowed total resistance and the case and sink temperatures at the limit, with a plain-language hint about what kind of heat sink that implies.
How to use it, step by step
- Enter power, ambient and junction limit with the thermal resistances.
- Read the heat-sink resistance you need.
- Use the finned sink tab to try dimensions and airflow.
- Check the interface and regulator heat on the last tab.
Tips from the guide
- Leave 20% margin on the calculated resistance.
- Use thermal paste instead of dry contact.
- Natural convection needs at least 4–6 mm fin spacing.
- Anodised or black-finished sinks radiate a little better.
Common mistakes to avoid
- Forgetting the interface resistance between the case and the sink.
- Using a heat sink's forced-air rating without airflow.
- Designing to the absolute maximum junction temperature.
Who uses it
- Electronics designers. Pick heat sinks for regulators, MOSFETs and LEDs.
- 3D printer and PC builders. Check cooling for drivers and CPUs.
- Students. Learn the thermal resistance network.
How to ask a question people can answer
A good thread on the Heat Sink & Thermal Resistance Calculator saves everyone time. Start with a title that names the exact problem, such as the input you used, the result you expected and the result you got. A title like “Not working” is hard to answer, while a title with the specifics gets replies quickly.
- Say what you tried. List the steps you followed and any settings you changed, so replies do not repeat what you already did.
- Share a small example. A short sample input and the output you saw is worth more than a long description. Remove anything private first.
- Mention your setup. Your device, browser and whether you are on a phone or a computer can explain many odd results.
- One question per thread. Separate topics get clearer answers and are easier to find later with the search box above.
- Come back and reply. If a suggestion worked, say so and upvote it, and if you found the fix yourself, post it for the next person.
Community rules
Be kind, stay on topic and keep personal data out of your posts. Do not post adult, hateful or illegal content, advertising or repeated links. Every post is shown with its author’s username and date, and posts that break these rules can be hidden by moderators. This space is for help with the Heat Sink & Thermal Resistance Calculator and related tasks, and it is separate from the sitewide discussion forum where broader topics live.