Keyway & Parallel Key Size Chart and Torque Calculator (DIN 6885) Community
Questions, answers and tips from people who use the Keyway & Parallel Key Size Chart and Torque Calculator (DIN 6885). Look up key width, height and keyway depths for any shaft diameter and check the torque capacity.
Ask a question about Keyway & Parallel Key Size Chart and Torque Calculator (DIN 6885)
Anyone can read this page. To ask a question, reply or vote, please log in. It takes under a minute.
Log in to askNo questions yet. Yours can be first.
This page shows only real posts from real people, so it starts empty. The guide below has the questions people most often have about the Keyway & Parallel Key Size Chart and Torque Calculator (DIN 6885). Pick one to start a thread, or write your own.
From the tool guide: common questions about Keyway & Parallel Key Size Chart and Torque Calculator (DIN 6885)
The items below are not posts by community members. They come from the written guide for this tool and are here to get a conversation started. Use “Ask a follow-up” to open a thread about any of them.
What this tool does
Machining or modelling a keyed shaft needs four numbers: key width, key height, the depth of the keyway in the shaft and in the hub. Enter the shaft diameter and this tool returns the standard parallel key (for example 8 × 7 mm on a 25 mm shaft), keyway depths t1 and t2, the depth from the opposite shaft surface to the groove bottom, a recommended standard key length and a corner radius range.
How to use it, step by step
- Enter the shaft diameter.
- Read the key size and depths.
- Optionally add torque, length and material.
- Check utilisation.
Tips from the guide
- Key length is about 1.0–1.5 × shaft diameter.
- Use two keys 120° apart for high loads.
- Use a keyway corner radius to avoid cracks.
- Use a higher safety factor for shock.
Common mistakes to avoid
- Using the chart for hubs in soft materials without checking bearing.
- Mixing up t1 and t2.
- Ignoring the stress concentration at keyways.
Who uses it
- Machinists. Cut the right keyway.
- Designers. Model keyed shafts.
- Students. Check machine design exercises.
- Maintenance. Replace keys correctly.
How to ask a question people can answer
A good thread on the Keyway & Parallel Key Size Chart and Torque Calculator (DIN 6885) saves everyone time. Start with a title that names the exact problem, such as the input you used, the result you expected and the result you got. A title like “Not working” is hard to answer, while a title with the specifics gets replies quickly.
- Say what you tried. List the steps you followed and any settings you changed, so replies do not repeat what you already did.
- Share a small example. A short sample input and the output you saw is worth more than a long description. Remove anything private first.
- Mention your setup. Your device, browser and whether you are on a phone or a computer can explain many odd results.
- One question per thread. Separate topics get clearer answers and are easier to find later with the search box above.
- Come back and reply. If a suggestion worked, say so and upvote it, and if you found the fix yourself, post it for the next person.
Community rules
Be kind, stay on topic and keep personal data out of your posts. Do not post adult, hateful or illegal content, advertising or repeated links. Every post is shown with its author’s username and date, and posts that break these rules can be hidden by moderators. This space is for help with the Keyway & Parallel Key Size Chart and Torque Calculator (DIN 6885) and related tasks, and it is separate from the sitewide discussion forum where broader topics live.