Laser Power/Speed Test Grid, Kerf Test & Material Safety Guide Community
Questions, answers and tips from people who use the Laser Power/Speed Test Grid, Kerf Test & Material Safety Guide. Generate GRBL G-code test grids, kerf/fit test files and read which materials are safe to laser.
Ask a question about Laser Power/Speed Test Grid, Kerf Test & Material Safety Guide
Anyone can read this page. To ask a question, reply or vote, please log in. It takes under a minute.
Log in to askNo questions yet. Yours can be first.
This page shows only real posts from real people, so it starts empty. The guide below has the questions people most often have about the Laser Power/Speed Test Grid, Kerf Test & Material Safety Guide. Pick one to start a thread, or write your own.
From the tool guide: common questions about Laser Power/Speed Test Grid, Kerf Test & Material Safety Guide
The items below are not posts by community members. They come from the written guide for this tool and are here to get a conversation started. Use “Ask a follow-up” to open a thread about any of them.
Does it work with LightBurn?
Use the SVG for layers; the G-code is for GRBL controllers directly.
From the tool guide Ask a follow-upWhat is dynamic mode M4?
Power follows the speed — better for engraving corners.
From the tool guide Ask a follow-upHow do I measure kerf?
Cut the 10 mm squares and measure them with calipers.
From the tool guide Ask a follow-upIs it safe to laser plywood?
Laser-grade plywood is usually fine with extraction; check the glue.
From the tool guide Ask a follow-upWhat this tool does
Every laser, material and lens combination needs its own power and speed — and the fastest way to find them is a test grid. This generator creates a matrix of squares in which each row has a different power and each column a different speed, as ready-to-run GRBL G-code (M4 dynamic or M3 constant power, with your spindle maximum) for engraving or for cutting, plus an SVG for LightBurn-style layers. You choose the power and speed ranges, the number of steps, the square size and the line interval.
How to use it, step by step
- Set power and speed ranges and the number of rows and columns.
- Download the G-code and run it on scrap with the origin at the lower left.
- Pick the best square and note its power and speed.
- Use the kerf tab to measure the beam width and fit.
Tips from the guide
- Run tests on scrap from the same batch as your project.
- Keep line interval about half the beam width for solid engraving.
- Use air assist when cutting wood and paper.
- Never leave a laser unattended and always wear rated eye protection.
Common mistakes to avoid
- Cutting PVC or vinyl — it releases toxic chlorine gas.
- Trusting settings from the internet without testing.
- Forgetting to set the machine's S-max to match the G-code.
Who uses it
- Diode and CO₂ laser owners. Find settings for new materials quickly.
- Makers and sellers. Calibrate engraving contrast and cut-through.
- Beginners. Learn what a laser can and cannot cut safely.
How to ask a question people can answer
A good thread on the Laser Power/Speed Test Grid, Kerf Test & Material Safety Guide saves everyone time. Start with a title that names the exact problem, such as the input you used, the result you expected and the result you got. A title like “Not working” is hard to answer, while a title with the specifics gets replies quickly.
- Say what you tried. List the steps you followed and any settings you changed, so replies do not repeat what you already did.
- Share a small example. A short sample input and the output you saw is worth more than a long description. Remove anything private first.
- Mention your setup. Your device, browser and whether you are on a phone or a computer can explain many odd results.
- One question per thread. Separate topics get clearer answers and are easier to find later with the search box above.
- Come back and reply. If a suggestion worked, say so and upvote it, and if you found the fix yourself, post it for the next person.
Community rules
Be kind, stay on topic and keep personal data out of your posts. Do not post adult, hateful or illegal content, advertising or repeated links. Every post is shown with its author’s username and date, and posts that break these rules can be hidden by moderators. This space is for help with the Laser Power/Speed Test Grid, Kerf Test & Material Safety Guide and related tasks, and it is separate from the sitewide discussion forum where broader topics live.