Thread & Fastener Chart — Tap Drill, Clearance, Counterbore Community
Questions, answers and tips from people who use the Thread & Fastener Chart — Tap Drill, Clearance, Counterbore. Metric & imperial thread data: tap drill, clearance holes, head sizes, torque.
Ask a question about Thread & Fastener Chart — Tap Drill, Clearance, Counterbore
Anyone can read this page. To ask a question, reply or vote, please log in. It takes under a minute.
Log in to askNo questions yet. Yours can be first.
This page shows only real posts from real people, so it starts empty. The guide below has the questions people most often have about the Thread & Fastener Chart — Tap Drill, Clearance, Counterbore. Pick one to start a thread, or write your own.
From the tool guide: common questions about Thread & Fastener Chart — Tap Drill, Clearance, Counterbore
The items below are not posts by community members. They come from the written guide for this tool and are here to get a conversation started. Use “Ask a follow-up” to open a thread about any of them.
How is tap drill calculated?
Drill ≈ major diameter − pitch, which gives about 75% thread engagement.
From the tool guide Ask a follow-upWhich standard for clearance holes?
ISO 273 close, medium and coarse series.
From the tool guide Ask a follow-upAre torque numbers exact?
No — they are a typical rule of thumb for dry steel threads (K = 0.2).
From the tool guide Ask a follow-upDoes it include BSP/NPT?
Not currently — metric and unified (UNC/UNF) only.
From the tool guide Ask a follow-upWhat this tool does
Every mechanical design needs the same handful of numbers over and over: the tap drill for a thread, the clearance hole for a bolt, the counterbore for a socket-head cap screw. This lookup gives them for metric threads M1.6 to M36 in coarse and fine pitch, with the minor and pitch diameters, the tensile stress area, the ISO 273 close/normal/loose clearance holes, ISO 4762 cap-screw head size and hex key, DIN 974 counterbore and depth, ISO 10642 countersunk head diameter and ISO 4032 nut size across flats.
How to use it, step by step
- Choose a metric thread and pitch (or the imperial tab).
- Read the tap drill and clearance hole.
- Check head, counterbore and nut dimensions.
- Use the preload and torque guidance for the property class.
Tips from the guide
- Use normal clearance for general work and close for locating dowels.
- Counterbore depth should exceed the head height by ~0.4 mm for flush mounting.
- Lubricated threads need less torque than the dry values shown.
- For critical joints use a torque specification or a calculation, not a rule of thumb.
Common mistakes to avoid
- Using the nominal diameter as the tap drill.
- Using coarse clearance holes where alignment matters.
- Treating the torque figure as a guaranteed specification.
Who uses it
- CAD students. Model holes and fasteners correctly the first time.
- Machinists. Tap drill and clearance at a glance.
- Makers and 3D printing users. Hole sizes that actually fit printed parts.
How to ask a question people can answer
A good thread on the Thread & Fastener Chart — Tap Drill, Clearance, Counterbore saves everyone time. Start with a title that names the exact problem, such as the input you used, the result you expected and the result you got. A title like “Not working” is hard to answer, while a title with the specifics gets replies quickly.
- Say what you tried. List the steps you followed and any settings you changed, so replies do not repeat what you already did.
- Share a small example. A short sample input and the output you saw is worth more than a long description. Remove anything private first.
- Mention your setup. Your device, browser and whether you are on a phone or a computer can explain many odd results.
- One question per thread. Separate topics get clearer answers and are easier to find later with the search box above.
- Come back and reply. If a suggestion worked, say so and upvote it, and if you found the fix yourself, post it for the next person.
Community rules
Be kind, stay on topic and keep personal data out of your posts. Do not post adult, hateful or illegal content, advertising or repeated links. Every post is shown with its author’s username and date, and posts that break these rules can be hidden by moderators. This space is for help with the Thread & Fastener Chart — Tap Drill, Clearance, Counterbore and related tasks, and it is separate from the sitewide discussion forum where broader topics live.