Mohr's Circle Calculator — Principal Stresses & Stress Transformation Community
Questions, answers and tips from people who use the Mohr's Circle Calculator — Principal Stresses & Stress Transformation. Principal stresses, maximum shear, von Mises and Tresca from σx, σy and τxy, with the circle drawn.
Ask a question about Mohr's Circle Calculator — Principal Stresses & Stress Transformation
Anyone can read this page. To ask a question, reply or vote, please log in. It takes under a minute.
Log in to askNo questions yet. Yours can be first.
This page shows only real posts from real people, so it starts empty. The guide below has the questions people most often have about the Mohr's Circle Calculator — Principal Stresses & Stress Transformation. Pick one to start a thread, or write your own.
From the tool guide: common questions about Mohr's Circle Calculator — Principal Stresses & Stress Transformation
The items below are not posts by community members. They come from the written guide for this tool and are here to get a conversation started. Use “Ask a follow-up” to open a thread about any of them.
What are principal stresses?
The maximum and minimum normal stresses at a point, where the shear stress is zero.
From the tool guide Ask a follow-upWhat is von Mises stress?
An equivalent tensile stress used to predict yielding of ductile metals.
From the tool guide Ask a follow-upIs the circle to scale?
Yes, the diagram uses the actual stress values.
From the tool guide Ask a follow-upWhat this tool does
Mohr's circle is the graphical way to understand how the stress at a point changes with the orientation of the plane you look at. Enter the normal stresses σx and σy and the shear stress τxy (in any consistent units, usually MPa) and this calculator gives the principal stresses σ₁ and σ₂, the angle of the principal planes, the maximum in-plane shear stress, the planes where it acts, the average stress (centre of the circle), and the stress components on any plane you choose at an angle θ — and draws the circle with points X and Y, the principal stresses, τmax and your chosen plane.
How to use it, step by step
- Enter σx, σy and τxy.
- Optionally enter a plane angle and a yield strength.
- Read the principal and shear stresses and the equivalent stresses.
- Use the circle diagram to check signs and geometry.
Tips from the guide
- Use tension positive, compression negative.
- Check the sign of τxy against your convention (here: upward on the +x face).
- Compare von Mises with yield for ductile metals.
- The principal angle is measured counter-clockwise from the x-axis.
Common mistakes to avoid
- Mixing units between σ and τ.
- Using Mohr's circle for 3-D stress states without adding σ₃.
- Confusing the angle on the circle (2θ) with the physical angle (θ).
Who uses it
- Mechanical and civil students. Solve stress transformation problems and check answers.
- Design engineers. Quick yield checks at critical points.
- Technicians. Interpret strain-gauge rosette results.
How to ask a question people can answer
A good thread on the Mohr's Circle Calculator — Principal Stresses & Stress Transformation saves everyone time. Start with a title that names the exact problem, such as the input you used, the result you expected and the result you got. A title like “Not working” is hard to answer, while a title with the specifics gets replies quickly.
- Say what you tried. List the steps you followed and any settings you changed, so replies do not repeat what you already did.
- Share a small example. A short sample input and the output you saw is worth more than a long description. Remove anything private first.
- Mention your setup. Your device, browser and whether you are on a phone or a computer can explain many odd results.
- One question per thread. Separate topics get clearer answers and are easier to find later with the search box above.
- Come back and reply. If a suggestion worked, say so and upvote it, and if you found the fix yourself, post it for the next person.
Community rules
Be kind, stay on topic and keep personal data out of your posts. Do not post adult, hateful or illegal content, advertising or repeated links. Every post is shown with its author’s username and date, and posts that break these rules can be hidden by moderators. This space is for help with the Mohr's Circle Calculator — Principal Stresses & Stress Transformation and related tasks, and it is separate from the sitewide discussion forum where broader topics live.