Mouse Ears Generator — Anti-Warp Pads for STL Files Community
Questions, answers and tips from people who use the Mouse Ears Generator — Anti-Warp Pads for STL Files. Add thin disc pads to the corners of a model to stop warping, without a messy brim.
Ask a question about Mouse Ears Generator — Anti-Warp Pads for STL Files
Anyone can read this page. To ask a question, reply or vote, please log in. It takes under a minute.
Log in to askNo questions yet. Yours can be first.
This page shows only real posts from real people, so it starts empty. The guide below has the questions people most often have about the Mouse Ears Generator — Anti-Warp Pads for STL Files. Pick one to start a thread, or write your own.
From the tool guide: common questions about Mouse Ears Generator — Anti-Warp Pads for STL Files
The items below are not posts by community members. They come from the written guide for this tool and are here to get a conversation started. Use “Ask a follow-up” to open a thread about any of them.
Are the ears fused to the part?
They overlap the corner; slicers merge them into one layer.
From the tool guide Ask a follow-upDoes it work for round parts?
Round bottoms have no corners, so use a brim instead.
From the tool guide Ask a follow-upWhat this tool does
Warping starts at the corners of a part's first layer. Mouse ears are thin discs at those corners that spread the pull over a larger area and hold the corner down. They are cheaper than a full brim, leave a cleaner part and peel off with a knife. This tool finds the flat bottom of your model, takes its convex footprint and adds a disc at every sharp corner.
How to use it, step by step
- Drop in the model lying flat.
- Set radius, height and corner angle.
- Check the preview.
- Download the model with ears.
Tips from the guide
- Use two layers of height for stronger hold.
- Increase radius on bigger parts, 10–15 mm.
- Push ears outward slightly if the part corner is rounded.
- Cut ears off with a craft knife.
Common mistakes to avoid
- Using a model without a flat bottom face.
- Making ears too thick so they are hard to remove.
- Placing ears on parts where they would touch other objects on the bed.
Who uses it
- ABS / ASA printers. Hold large prints flat.
- Nylon users. Reduce corner lift.
- PLA large parts. Stop edge curl on cool beds.
- Beginners. A simple way to improve adhesion.
How to ask a question people can answer
A good thread on the Mouse Ears Generator — Anti-Warp Pads for STL Files saves everyone time. Start with a title that names the exact problem, such as the input you used, the result you expected and the result you got. A title like “Not working” is hard to answer, while a title with the specifics gets replies quickly.
- Say what you tried. List the steps you followed and any settings you changed, so replies do not repeat what you already did.
- Share a small example. A short sample input and the output you saw is worth more than a long description. Remove anything private first.
- Mention your setup. Your device, browser and whether you are on a phone or a computer can explain many odd results.
- One question per thread. Separate topics get clearer answers and are easier to find later with the search box above.
- Come back and reply. If a suggestion worked, say so and upvote it, and if you found the fix yourself, post it for the next person.
Community rules
Be kind, stay on topic and keep personal data out of your posts. Do not post adult, hateful or illegal content, advertising or repeated links. Every post is shown with its author’s username and date, and posts that break these rules can be hidden by moderators. This space is for help with the Mouse Ears Generator — Anti-Warp Pads for STL Files and related tasks, and it is separate from the sitewide discussion forum where broader topics live.