O-Ring Groove & Gland Design Calculator (Squeeze, Fill, Stretch) Community
Questions, answers and tips from people who use the O-Ring Groove & Gland Design Calculator (Squeeze, Fill, Stretch). Size an O-ring groove: gland depth, width, squeeze, fill and stretch for static, radial and dynamic seals.
Ask a question about O-Ring Groove & Gland Design Calculator (Squeeze, Fill, Stretch)
Anyone can read this page. To ask a question, reply or vote, please log in. It takes under a minute.
Log in to askNo questions yet. Yours can be first.
This page shows only real posts from real people, so it starts empty. The guide below has the questions people most often have about the O-Ring Groove & Gland Design Calculator (Squeeze, Fill, Stretch). Pick one to start a thread, or write your own.
From the tool guide: common questions about O-Ring Groove & Gland Design Calculator (Squeeze, Fill, Stretch)
The items below are not posts by community members. They come from the written guide for this tool and are here to get a conversation started. Use “Ask a follow-up” to open a thread about any of them.
Does it work for AS568 sizes?
Yes, use the cross-section and ID.
From the tool guide Ask a follow-upIs it valid at high pressure?
Use the supplier's data above about 100 bar.
From the tool guide Ask a follow-upWhat this tool does
An O-ring seals by being squeezed between two surfaces, but the groove must leave room for it to deform. Enter the O-ring cross-section and inner diameter, choose the application — static face, static radial or dynamic — and the tool returns the recommended groove depth and width, the O-ring's outer diameter, and checks your own groove for squeeze percentage, gland fill and stretch against the usual design limits.
How to use it, step by step
- Enter cross-section and inner diameter.
- Choose the application.
- Optionally enter your groove depth and width.
- Read the checks.
Tips from the guide
- Static face seals use 20–30% squeeze.
- Keep dynamic squeeze at 8–16%.
- Fill should stay under 85%.
- Break sharp groove edges.
Common mistakes to avoid
- Using static squeeze for dynamic seals.
- Forgetting the fluid swell of the elastomer.
- Excess stretch over 5%.
Who uses it
- Mechanical designers. Size seal grooves.
- 3D printing users. Design printed seals.
- Maintenance. Check an existing groove.
- Students. Seal design exercises.
How to ask a question people can answer
A good thread on the O-Ring Groove & Gland Design Calculator (Squeeze, Fill, Stretch) saves everyone time. Start with a title that names the exact problem, such as the input you used, the result you expected and the result you got. A title like “Not working” is hard to answer, while a title with the specifics gets replies quickly.
- Say what you tried. List the steps you followed and any settings you changed, so replies do not repeat what you already did.
- Share a small example. A short sample input and the output you saw is worth more than a long description. Remove anything private first.
- Mention your setup. Your device, browser and whether you are on a phone or a computer can explain many odd results.
- One question per thread. Separate topics get clearer answers and are easier to find later with the search box above.
- Come back and reply. If a suggestion worked, say so and upvote it, and if you found the fix yourself, post it for the next person.
Community rules
Be kind, stay on topic and keep personal data out of your posts. Do not post adult, hateful or illegal content, advertising or repeated links. Every post is shown with its author’s username and date, and posts that break these rules can be hidden by moderators. This space is for help with the O-Ring Groove & Gland Design Calculator (Squeeze, Fill, Stretch) and related tasks, and it is separate from the sitewide discussion forum where broader topics live.