Parametric Bracket, Standoff & Spacer Generator Community
Questions, answers and tips from people who use the Parametric Bracket, Standoff & Spacer Generator. Generate L-brackets, standoffs, spacers, washers and mounting plates as STL.
Ask a question about Parametric Bracket, Standoff & Spacer Generator
Anyone can read this page. To ask a question, reply or vote, please log in. It takes under a minute.
Log in to askNo questions yet. Yours can be first.
This page shows only real posts from real people, so it starts empty. The guide below has the questions people most often have about the Parametric Bracket, Standoff & Spacer Generator. Pick one to start a thread, or write your own.
From the tool guide: common questions about Parametric Bracket, Standoff & Spacer Generator
The items below are not posts by community members. They come from the written guide for this tool and are here to get a conversation started. Use “Ask a follow-up” to open a thread about any of them.
Are the meshes watertight?
Yes — boolean results are healed to a closed manifold mesh.
From the tool guide Ask a follow-upCan I make other shapes?
This tool covers these five; the SVG extruder and 3D text tools cover custom outlines.
From the tool guide Ask a follow-upWhat this tool does
Many printed parts are just plain hardware: a standoff to lift a circuit board, a spacer, a washer, an L-bracket, a mounting plate with a grid of screw holes. This generator builds each from the dimensions you type — outer and inner diameters, lengths, thickness, hole sizes and counts, spacing — using solid-modelling operations (boolean unions and cuts) and exports closed, manifold meshes that slice cleanly.
How to use it, step by step
- Choose the part type.
- Enter its dimensions and hole sizes.
- Check the 3D preview and weight.
- Download the STL or 3MF.
Tips from the guide
- Add 0.2 mm to screw holes for printed parts.
- Print brackets with layers parallel to the bend direction for strength.
- Use at least 3–4 perimeters for load-bearing brackets.
- Hex standoffs are easier to tighten than round ones.
Common mistakes to avoid
- Making holes the exact screw diameter and finding the screw will not fit.
- Printing a bracket with layer lines across the bend.
- Using too thin a leg for the load.
Who uses it
- Makers and electronics hobbyists. Custom standoffs and mounts without CAD.
- CAD students. See parametric parts and check dimensions.
- Anyone repairing things. Print a missing spacer or bracket quickly.
How to ask a question people can answer
A good thread on the Parametric Bracket, Standoff & Spacer Generator saves everyone time. Start with a title that names the exact problem, such as the input you used, the result you expected and the result you got. A title like “Not working” is hard to answer, while a title with the specifics gets replies quickly.
- Say what you tried. List the steps you followed and any settings you changed, so replies do not repeat what you already did.
- Share a small example. A short sample input and the output you saw is worth more than a long description. Remove anything private first.
- Mention your setup. Your device, browser and whether you are on a phone or a computer can explain many odd results.
- One question per thread. Separate topics get clearer answers and are easier to find later with the search box above.
- Come back and reply. If a suggestion worked, say so and upvote it, and if you found the fix yourself, post it for the next person.
Community rules
Be kind, stay on topic and keep personal data out of your posts. Do not post adult, hateful or illegal content, advertising or repeated links. Every post is shown with its author’s username and date, and posts that break these rules can be hidden by moderators. This space is for help with the Parametric Bracket, Standoff & Spacer Generator and related tasks, and it is separate from the sitewide discussion forum where broader topics live.