STL Simplifier & Smoother (Reduce Triangles, Decimate) Community
Questions, answers and tips from people who use the STL Simplifier & Smoother (Reduce Triangles, Decimate). Reduce the triangle count of a heavy STL/OBJ or smooth a rough scan without shrinking it.
Ask a question about STL Simplifier & Smoother (Reduce Triangles, Decimate)
Anyone can read this page. To ask a question, reply or vote, please log in. It takes under a minute.
Log in to askNo questions yet. Yours can be first.
This page shows only real posts from real people, so it starts empty. The guide below has the questions people most often have about the STL Simplifier & Smoother (Reduce Triangles, Decimate). Pick one to start a thread, or write your own.
From the tool guide: common questions about STL Simplifier & Smoother (Reduce Triangles, Decimate)
The items below are not posts by community members. They come from the written guide for this tool and are here to get a conversation started. Use “Ask a follow-up” to open a thread about any of them.
Does reducing change the size?
Overall dimensions stay within the deviation shown; volume change is reported.
From the tool guide Ask a follow-upWhy did it stop early?
The deviation limit or a topology safety check blocked further collapses.
From the tool guide Ask a follow-upDoes it keep colour/texture?
No — output is plain geometry (STL/3MF/OBJ/PLY/GLB).
From the tool guide Ask a follow-upWhat this tool does
Photogrammetry scans, sculpts and exports from some CAD programs can contain millions of triangles — files too big to upload, slow to slice and heavy to open. This tool reduces the triangle count with quadric-error edge collapse, the same family of algorithm used in professional mesh software: it repeatedly removes the edge whose loss changes the surface least, so flat regions lose triangles first and curved, detailed regions keep them. You choose how many triangles to keep and, optionally, a maximum surface deviation in millimetres so the reduction stops before it distorts the part.
How to use it, step by step
- Drop in a dense STL, OBJ, 3MF or scan.
- Choose Reduce, Smooth or both and set the strength.
- Optionally set a maximum deviation in mm.
- Check the result in the viewer and download it.
Tips from the guide
- Reduce to 20–50% for printing; the difference is invisible at 0.2 mm layers.
- Use a deviation limit of about 0.05–0.2 mm for parts that must stay accurate.
- Smooth before reducing if the scan is noisy.
- Keep the original — decimation cannot be undone after you download.
Common mistakes to avoid
- Reducing a low-poly CAD part: it has few triangles already and corners will suffer.
- Smoothing mechanical parts and rounding their sharp edges — raise the sharp-edge angle protection.
- Ignoring a not-watertight warning before printing.
Who uses it
- Makers and printers. Shrink huge STL files so slicers and upload sites cope.
- 3D scanners. Clean noisy photogrammetry meshes before printing.
- Game and AR developers. Make lighter models for the web and mobile.
How to ask a question people can answer
A good thread on the STL Simplifier & Smoother (Reduce Triangles, Decimate) saves everyone time. Start with a title that names the exact problem, such as the input you used, the result you expected and the result you got. A title like “Not working” is hard to answer, while a title with the specifics gets replies quickly.
- Say what you tried. List the steps you followed and any settings you changed, so replies do not repeat what you already did.
- Share a small example. A short sample input and the output you saw is worth more than a long description. Remove anything private first.
- Mention your setup. Your device, browser and whether you are on a phone or a computer can explain many odd results.
- One question per thread. Separate topics get clearer answers and are easier to find later with the search box above.
- Come back and reply. If a suggestion worked, say so and upvote it, and if you found the fix yourself, post it for the next person.
Community rules
Be kind, stay on topic and keep personal data out of your posts. Do not post adult, hateful or illegal content, advertising or repeated links. Every post is shown with its author’s username and date, and posts that break these rules can be hidden by moderators. This space is for help with the STL Simplifier & Smoother (Reduce Triangles, Decimate) and related tasks, and it is separate from the sitewide discussion forum where broader topics live.