Surface Finish Converter & Chart (Ra, Rz, RMS, N Grades, µin) Community
Questions, answers and tips from people who use the Surface Finish Converter & Chart (Ra, Rz, RMS, N Grades, µin). Convert Ra, µin, RMS and ISO N grades, with typical roughness by process and by application.
Ask a question about Surface Finish Converter & Chart (Ra, Rz, RMS, N Grades, µin)
Anyone can read this page. To ask a question, reply or vote, please log in. It takes under a minute.
Log in to askNo questions yet. Yours can be first.
This page shows only real posts from real people, so it starts empty. The guide below has the questions people most often have about the Surface Finish Converter & Chart (Ra, Rz, RMS, N Grades, µin). Pick one to start a thread, or write your own.
From the tool guide: common questions about Surface Finish Converter & Chart (Ra, Rz, RMS, N Grades, µin)
The items below are not posts by community members. They come from the written guide for this tool and are here to get a conversation started. Use “Ask a follow-up” to open a thread about any of them.
What is Ra?
The arithmetic mean roughness — the average height deviation from the mean line.
From the tool guide Ask a follow-upIs Rz exactly 5 × Ra?
No, it varies by process; the range shown is a rule of thumb.
From the tool guide Ask a follow-upWhat is the N grade?
An ISO scale of roughness classes N1–N12 defined by Ra values.
From the tool guide Ask a follow-upWhat this tool does
Surface roughness is quoted in different ways depending on where the drawing comes from: Ra in micrometres on metric drawings, Ra or RMS in microinches on US drawings, ISO N grades on older European ones, and Rz for peak-to-valley height. This converter takes any of Ra µm, Ra µin, RMS µin or an N grade (1–12) and shows all the others — Ra in both units, the nearest ISO grade, the RMS equivalent (about 1.11 × Ra), an Rz range (typically 4–7 × Ra) and a plain-language description of the finish — with one-click chips for common values like 0.8 µm, 1.6 µm, 3.2 µm, 63 µin and N7.
How to use it, step by step
- Enter a value and choose its unit.
- Read the equivalents and the description.
- Open the process tab to see what a method can achieve.
- Open the application tab to choose a finish for your part.
Tips from the guide
- Specify the loosest finish that works — each step finer costs more.
- Remember Rz is not a fixed multiple of Ra.
- Measure across the lay of the machining marks.
- Use µin for US drawings and µm for metric ones.
Common mistakes to avoid
- Treating RMS and Ra as the same number.
- Specifying a lapped finish where turning would do.
- Comparing Ra from different cut-off lengths.
Who uses it
- Machinists and engineers. Convert callouts between metric and US drawings.
- Designers. Pick a realistic, economical finish.
- Quality inspectors. Compare measured Ra with the drawing.
How to ask a question people can answer
A good thread on the Surface Finish Converter & Chart (Ra, Rz, RMS, N Grades, µin) saves everyone time. Start with a title that names the exact problem, such as the input you used, the result you expected and the result you got. A title like “Not working” is hard to answer, while a title with the specifics gets replies quickly.
- Say what you tried. List the steps you followed and any settings you changed, so replies do not repeat what you already did.
- Share a small example. A short sample input and the output you saw is worth more than a long description. Remove anything private first.
- Mention your setup. Your device, browser and whether you are on a phone or a computer can explain many odd results.
- One question per thread. Separate topics get clearer answers and are easier to find later with the search box above.
- Come back and reply. If a suggestion worked, say so and upvote it, and if you found the fix yourself, post it for the next person.
Community rules
Be kind, stay on topic and keep personal data out of your posts. Do not post adult, hateful or illegal content, advertising or repeated links. Every post is shown with its author’s username and date, and posts that break these rules can be hidden by moderators. This space is for help with the Surface Finish Converter & Chart (Ra, Rz, RMS, N Grades, µin) and related tasks, and it is separate from the sitewide discussion forum where broader topics live.