SVG / DXF Path Offset & Kerf Compensation Tool Community
Questions, answers and tips from people who use the SVG / DXF Path Offset & Kerf Compensation Tool. Grow, shrink or kerf-compensate every closed path in an SVG or DXF so laser and CNC parts finish at the drawn size.
Ask a question about SVG / DXF Path Offset & Kerf Compensation Tool
Anyone can read this page. To ask a question, reply or vote, please log in. It takes under a minute.
Log in to askNo questions yet. Yours can be first.
This page shows only real posts from real people, so it starts empty. The guide below has the questions people most often have about the SVG / DXF Path Offset & Kerf Compensation Tool. Pick one to start a thread, or write your own.
From the tool guide: common questions about SVG / DXF Path Offset & Kerf Compensation Tool
The items below are not posts by community members. They come from the written guide for this tool and are here to get a conversation started. Use “Ask a follow-up” to open a thread about any of them.
What this tool does
Every laser beam and router bit removes a strip of material. Cut a 20 mm square on its outline and it ends up smaller than 20 mm while its holes end up larger — a problem for press fits, finger joints and anything that must fit together. Kerf compensation moves each outer outline outward and each hole inward by half the kerf so the finished part matches the drawing.
How to use it, step by step
- Drop in an SVG or DXF.
- Choose kerf, grow or shrink.
- Enter the kerf or distance.
- Check the preview and download.
Tips from the guide
- Measure your kerf with a test cut.
- Typical CO2 laser kerf is 0.1–0.25 mm.
- Check collapsed warnings with small holes.
- Offset before nesting parts.
Common mistakes to avoid
- Offsetting open paths and expecting them to move.
- Using full kerf instead of half.
- Large offsets on very concave shapes.
Who uses it
- Laser cutters. Tight press fits and finger joints.
- CNC routers. Tool radius compensation.
- 3D printing. Add tolerance to outlines before extruding.
- Sign makers. Grow outlines for borders.
How to ask a question people can answer
A good thread on the SVG / DXF Path Offset & Kerf Compensation Tool saves everyone time. Start with a title that names the exact problem, such as the input you used, the result you expected and the result you got. A title like “Not working” is hard to answer, while a title with the specifics gets replies quickly.
- Say what you tried. List the steps you followed and any settings you changed, so replies do not repeat what you already did.
- Share a small example. A short sample input and the output you saw is worth more than a long description. Remove anything private first.
- Mention your setup. Your device, browser and whether you are on a phone or a computer can explain many odd results.
- One question per thread. Separate topics get clearer answers and are easier to find later with the search box above.
- Come back and reply. If a suggestion worked, say so and upvote it, and if you found the fix yourself, post it for the next person.
Community rules
Be kind, stay on topic and keep personal data out of your posts. Do not post adult, hateful or illegal content, advertising or repeated links. Every post is shown with its author’s username and date, and posts that break these rules can be hidden by moderators. This space is for help with the SVG / DXF Path Offset & Kerf Compensation Tool and related tasks, and it is separate from the sitewide discussion forum where broader topics live.